Instruction Manual Electronic Total Station R-300 SERIES R-315(N)/R-325(N)/R-335(N) R-322(N)/R-323(N) PENTAX Industrial Instrume
P7 1 BEFORE USING THE INSTRUMENT Top handle Objective lens Centering knob R-335 (N):
・ P8 1-2 Unpacking and Packing Unpacking the Instrument from the case q Set the case down gently with the lid facing upwards. w Open the latches
P9 1 BEFORE USING THE INSTRUMENT・・・・ 1-4 Attaching and Charging the Battery Removing the Battery ①①①① Turn the lock lever anticlockwise
P10 1 BEFORE USING THE INSTRUMENT Remaining Battery Charge When the instrument's power is turned on, a battery mark "" will b
battery is begun. P11 [Detaching of battery] ① Press the lock lever and slide the battery to the lock lever direction. ② Detach the battery
P12 [How to charge] ①①①① It begins charging automatically when you set the battery packing in the charger which beams the power supply lamp.
P13 2 DISPLAY AND KEYBOARD 2-1 Display and Keyboard 2-2 Operation Key Key Description [POWER] ON/OFF of power supply [ESC
P14 2 DISPLAY AND KEYBOARD 2-3 Function Key Display F. Key Description Mode A 「「「「MEAS」」」」 F1 Pressing this key one time measures the dis
P15 [How to move the menu number] Example: The cursor is located at Menu 1. Press the numeric key 0 and 2 to move to Menu 2. ↓
P16 2 DISPLAY AND KEYBOARD 2-4 Alphanumeric Input The point name is input by the Alphanumetric keys as following. Key Letter under Key Letter
PRECAUTIONS REGARDING SAFETY Safety Precautions (Must be followed) The following items are intended to prevent possible injury to the user or othe
P17 3 PREPARATION FOR SURVEYING 3 PREPARATION FOR SURVEYING 3-1 Centering and Leveling of the Instrument Setting up the instrument and the tri
P18 If the Laser key is pushed and the laser plummet key is pushed, it becomes the brightness adjustment screen of the laser plummet device.
P19 3-4 Leveling with Circular vial Tripod is matched according to the following points, and expand and contract and match the vial of the Ci
P20 [Leveling] ①①①① Rotate instrument horizontally and make two Leveling screws arbitrarily chosen parallel to the display. ②②②② Turn
P21
3 PREPARATION FOR SURVEYING・・・・ [Target sighting by Auto focus] The Auto focus of R-300 series has following two modes. 1. Normal mode : Pressing AF
3 PREPARATION FOR SURVEYING [Auto focus :Target sighting by Continuous mode] ①①①① Loosen the telescope clamp and horizontal clamp screws. ②②②②
3 PREPARATION FOR SURVEYING [Target sighting by Manual focus] ①①①① Loosen the telescope clamp and horizontal clamp screws. ②②②② Point the t
4 TURNING THE POWER ON 4 TURNING THE POWER ON 4-1 Turning the Power On and Off Pressing the [POWER] key causes the initial screen. (The [POWER] ke
4 TURNING THE POWER ON 4-2 Adjusting LCD Contrast Press [F4] while holding down the Illumination key to access the screen for adjusting LCD contrast
PRECAUTIONS REGARDING SAFETY・・・・ WARNING Do not stare into the laser beam directly as this may result in damage to your eyes. R-300 is a Cl
4 TURNING THE POWER ON 4-3 Adjusting Illumination Brightness Press [F5] while holding down the Illumination key to access the screen for adjusting
P1 PRECAUTIONS REGARDING SAFETY・・・・ CAUTION For security, please do the opening inspection and inspection every a fixed period and adjust
Check with your local solid waste officials for details for recycling. ・ P2 Usage Precautions Surveying instruments are high-precision instrumen
P3 PRECAUTIONS REGARDING SAFETY・・・・ ③ There is a possibility that synthesized values are calculated and the distance may become longer or sh
the case and storing them, apply electrically resistant tape to the poles of the battery. Storing the battery and charger as is may result in fire o
P5 CONTENTS PRECAUTIONS REGARDING SAFETY Safety Precautions Usage Precautions CONTENTS 1 BEFORE USING THE INSTRUMENT 1-1 Names of Parts 1
P6 1 BEFORE USING THE INSTRUMENT 1 BEFORE USING THE INSTRUMENT 1-1 Names of Parts Focusing knob AF butto
Comments to this Manuals