4 Align the film leader with the
film leader end mark and make
sure that the film leader is posi-
tioned under the film retainer as
shown in the illustration.
• If the end of the film leader is extremely
bent, straighten it or cut off the bent
portion.
• If you have pulled out too much film,
push it back into the cartridge to
reduce the slack.
5 Close the back cover.
6 Turn the main switch to [ON].
The film will advance to frame 1 automati-
cally, and the LCD panel will display the
exposure counter 1 and film status infor-
mation.
Incorrect film loading
If the film is not loaded
properly, the LCD panel
will display . Open
the back cover and
load the film again.
Comments to this Manuals