Pentax ist User Manual download pdf (Page 104)

102

USING THE BUILT-IN FLASH

1 Press the flash mode button

until appears on the LCD

panel.

2 Press the shutter release

button halfway down,

and the built-in flash

automatically pops up when

the flash is required.

3 When the flash is ready to

discharge, the appears in

the viewfinder and on the

LCD panel.

Auto Pop-up Flash Function

In this mode, the built-in flash pops up and discharges

automatically in low light and backlight condition.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 155 156

OPERATING MANUAL 1
WARNING: 3
CAUTION: 3
PRECAUTIONS FOR YOUR CAMERA 4
Other precautions 5
TABLE OF CONTENTS 10
NAMES OF WORKING PARTS 12
LCD PANEL INDICATIONS 14
VIEWFINDER INDICATIONS 16
1 Load the batteries 17
2 Set the date and time 17
3 Attach the lens 17
4 Turn the power switch ON 18
5 Adjust the viewfinder’s 18
6 Set the Auto Picture mode 18
7 Load the film 18
8 Set the autofocus mode 19
9 Compose the subject by 19
10 Adjust the focus and take 19
CAMERA FUNCTIONS AVAILABLE 20
WITH VARIOUS LENSES 20
HOW TO USE THIS OPERATING 22
1 Pass the end of the strap 24
2 Pass the other end of the 24
1 Open the battery chamber 25
3 Push in the battery chamber 25
LOADING THE BATTERIES 26
Low Battery Warning 28
1 Turn the power ON 29
1 Turn the power ON and 30
2 Keep pressing the DATE 30
3 Each time the DATE button 30
1 Press the DATE button 32
2 While the date mode is 32
3 Press the shutter release 33
1 Remove the body mount cap 34
2 Align the red dots on the 34
4 To detach the lens, hold 34
1 Look through the viewfinder 36
1 To open the back cover 37
2 Place the film cartridge in 37
4 Align the film leader with 37
LOADING FILM 38
OPERATING THE SHUTTER 39
RELEASE BUTTON 39
BASIC OPERATION (SHOOTING) 41
1 Press the drive mode button 42
1 Set the mode dial to the 43
1 Set the metering mode 44
1 Set the focus point mode 46
2 In this mode, the built-in 47
USING THE ZOOM LENS 48
HOLDING THE CAMERA 49
1 Confirm that the focus mode 50
2 Look through the viewfinder 50
3 Confirm that the shutter 51
4 Take a picture 51
1 The film automatically 52
2 When the film is fully 52
3 Open the back cover and 52
1 Turn the main/preview 53
2 Rewind starts 53
1 Load the non-DX coded film 54
2 Turn the select dial to set 54
ADVANCED OPERATIONS 55
SELECTING A DRIVE MODE 56
2 Shoot consecutive frames 57
1 Mount the camera on the 58
2 Press the drive mode button 58
4 Press the shutter release 59
5 Press the drive mode button 60
4 When the picture is taken 62
2 Take the first picture 64
1 Press the auto bracketing 65
2 Turn the select dial while 66
SELECTING THE PICTURE MODES 68
1 Set the mode dial to the 69
2 The selected mode is 69
1 Set the mode dial to 71
SELECTING ANOTHER EXPOSURE 76
Effect of aperture 77
2 Select the desired shutter 78
3 Confirm the shutter speed 78
* Exposure Warning 79
2 Select the desired aperture 80
Exposure Warning 81
2 The bar graph appears in 82
3 Turn the select dial to 82
4 Turn the select dial to 83
5 Confirm the shutter speed 83
Slow-Speed-Sync Mode 85
1 With the Metered Manual 86
1 While holding down the AV 87
2 Confirm the compensation 87
1 Press the AE lock button 88
2 Turn the select dial to 89
ABOUT FOCUSING 93
3 When the subject is in 94
2 Frame the subject, then 94
3 When the subject comes 96
1 Set the focus mode switch 100
2 Frame the subject. If the 100
3 Aim the center of the 101
2 While looking through the 102
Hard-to-Autofocus Subjects 103
Notes on Accessories 103
2 Press the shutter release 104
3 When the flash is ready to 104
1 Press the flash mode button 104
1 At each press of the flash 106
About Red-eye Phenomenon 107
1 Press the flash pop-up 108
2 Press the flash mode button 108
4 After using the Built-in 108
Daylight-Sync Shooting 110
1 The flash recommended 111
1 When using an 112
ADVANCED OPERATION FOR THE 113
BUILT-IN FLASH 113
4.Metered Manual Mode 114
BASIC OPERATION 115
(PREPARATION) 115
(SHOOTING) 115
ADVANCED OPERATIONSOTHERS 115
Built-in Flash 116
USING EXTERNAL FLASH 118
AF360FGZ 121
Contrast-Control-Sync Flash 125
ACCESSORIES (OPTIONAL) 130
Flash Accessories 131
Camera Cases 133
About Polarizing Filter 133
CUSTOM FUNCTIONS 134
NO. Setting Pages 135
1 Set the mode dial to 136
2 Use the four-way controller 136
3 Use the four-way controller 137
4 Set the mode dial to a 137
Setting the Custom Function 138
TROUBLESHOOTING 146
PROGRAM DIAGRAMS 148
Close-up Program Mode 149
SPECIFICATIONS TABLE 150
For customers in U.S.A 153
For customers in Canada 153
WARRANTY POLICY 154
Custom Functions 155

Comments to this Manuals

No comments

Pentax ist User Manual Page 104

Comments to this Manuals

Related products and manuals for Cameras Pentax ist