Pentax MZ-60 User Manual download pdf (Page 15)

6 Set the exposure mode to

Standard program mode.

Move the select lever to set the

pointer to while

depressing the exposure mode

button.

See page xx

7 Loading the film.

See page xx

8 Set to the Autofocus

Set the focus mode switch to

in down position.

See page xx

9 Compose the subject by

turning the zoom ring.

See page xx

Adjust the focus and take a picture.

Frame the subject in the focus

frame and depress the

shutter release button. Auto

flash pops up automatically if it

necessary. See page xx

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 117 118

OPERATING MANUAL 1
WARNING: 3
CAUTION: 3
PRECAUTIONS FOR YOUR CAMERA 4
Other precautions 5
PRECAUTIONS FOR BATTERY USAGE 5
TABLE OF CONTENTS 6
NAMES OF WORKING PARTS 10
????????????????????????????? 11
LCD PANEL INDICATION 12
VIEWFINDER INDICATION 13
1 Loading the batteries 14
2 Set the date and time 14
3 Attaching the lens 14
5 Turn the power switch ON 14
6 Set the exposure mode to 15
7 Loading the film 15
8 Set to the Autofocus 15
9 Compose the subject by 15
CAMERA FUNCTIONS AVAILABLE 16
WITH VARIOUS LENSES 16
HOW TO USE THIS OPERATING 18
1 Pass the end of the strap 20
2 Follow the same procedure 20
1 Open the battery chamber 21
2 Load two 3V lithium 21
3 Push in the battery chamber 21
LOADING THE BATTERIES 22
Low Battery Warning 24
1 Turn the power ON 25
2 Turn the power OFF 25
2 Keep depressing the [DATE] 26
1 At each depress of the 28
2 While the date mode is 28
1 Remove the body mount cap 30
2 Align the red dots on the 30
3 To remove the front lens 30
4 To remove the lens, hold 30
1 To open the back cover 32
2 Place the film cartridge in 32
4 Align the film leader with 33
5 Close the back cover and 33
FILM LOADING 34
OPERATING THE SHUTTER 35
RELEASE BUTTON 35
BASIC OPERATION (SHOOTING) 37
2 Set the pointer mark to 38
1 Depress the flash mode 39
2 In this mode, the built-in 39
SET THE SINGLE FRAME DRIVE 40
SET THE AUTO FOCUS MODE TO AF 41
USING THE ZOOM LENS 42
HOLDING THE CAMERA 43
1 Confirm that the focus mode 44
2 Frame the subject 44
3 Confirm that the shutter 44
4 When the subject is in 45
5 Take a picture 45
1 The film automatically 46
2 When the film is fully 46
3 Open the back cover and 46
1 Set the main switch to the 47
2 Holding the drive mode 47
ADVANCED OPERATIONS 49
SELECTING A DRIVE MODE 50
Consecutive-Frame Mode 51
1 Depress the drive mode 52
2 Focus on the subject first 52
3 Then depress the shutter 53
How to cancel 55
SELECTING 6 PICTURE MODES 56
1 Set the pointer mark to 58
EFFECT OF APERTURE AND 64
SHUTTER SPEED 64
Effect of aperture 65
3 Select the desired aperture 66
4??????????????????????? 67
3 Select the desired shutter 68
3 Move the select dial to 70
4 Move the select dial to 71
5 Confirm the shutter speed 71
6 in the center 71
Exposure Warning 72
1 In the Metered Manual 73
2 When using this mode, use 73
1 Position the area to be 74
2 is displayed in the 74
2 Frame the subject, then 75
3 While looking through the 75
1 Set the focus mode switch 75
MANUAL FOCUSING 76
HARD-TO-AUTOFOCUS SUBJECTS 78
1 1. Load the Non-DX corded 79
2 Move the select dial to set 79
2 Depress the shutter 80
At each depress of the flash 81
ABOUT RED-EYE PHENOMENON 82
1 Push the flash pop-up 84
2 appears in the 84
3 Depress the shutter release 84
4 After using the Built –in 84
FLASH OFF MODE 85
DAYLIGHT-SYNC SHOOTING 86
FLASH RECOMMENDED INDICATOR 87
INAPPROPRIATE LENS WARING 88
ADVANCED OPERATION FOR THE 89
BUILT-IN FLASH 89
4.Metered Manual Mode 90
(f/2.8 in this case) 91
OVERVIEW OF FLASH FUNCTION 94
Extension Cord F5P 97
Off-Camera Shoe 97
Adapter F 97
Hot Shoe 97
SLOW-SPEED-SYNC SHOOTING 100
ACCESSORIES (OPTIONAL) 104
FLASH ACESSORIES 105
Notes on accessories 107
TROUBLESHOOTING 108
PROGRAM LINE 110
SPECIFICATIONS 112
WARRANTY POLICY 114
For customers in U.S.A 116
For customers in Canada 116
01-200203 Printed in Japan 118

Comments to this Manuals

No comments

Pentax MZ-60 User Manual Page 15

Comments to this Manuals

Related products and manuals for Cameras Pentax MZ-60